[Dec 12, 2021] Latest 300-435 PDF Dumps & Real Tests Free Updated Today
300-435 Dumps With 100% Verified Q&As - Pass Guarantee or Full Refund
Cisco ENAUTO 300-435 Practice Test Questions, Cisco ENAUTO 300-435 Exam Practice Test Questions
The 300-435 ENAUTO exam measures the candidates’ knowledge and skills in implementing automated enterprise solutions, including Python programming, programming concepts, APIs, automation tools and controllers. This test is part of the requirements for the Cisco Certified DevNet Specialist – Enterprise Automation and Programmability certificate. In addition, after passing it, you satisfy the concentration exam requirements for two professional-level certifications, namely Cisco Certified DevNet Professional and CCNP Enterprise.
NEW QUESTION 66
A network administrator must troubleshoot a network issue using Cisco DNA Center. Which API request helps to determine issue details, impacted hosts, or suggested actions for the resolution?
- A. /dna/intent/v1/issues
- B. /dna/intent/v1/issue-enrichment-details
- C. /dna/intent/api/v1/issues
- D. /dna/api/v1/client-health/issues
Answer: C
Explanation:
Explanation
The intent/api/v1/issues request determine issue details, hosts impacted and suggests actions for resolution.
NEW QUESTION 67
Webhook that are generated by Cisco DNA Center are REST calls with which properties?
- A. XML payload delivered via POST
- B. JSON payload delivered via POST
- C. XML payload delivered via PUT
- D. JSON payload delivered via PUT
Answer: D
Explanation:
Section: Cisco DNA Center
Explanation/Reference: https://developer.cisco.com/docs/dna-center/#!using-id-values-in-rest-requests
NEW QUESTION 68
Which protocol should be run on the LAN side of two edge routers (that are terminating primary and backup WAN circuits) to provide quick failover in case of primary WAN circuit failure?
- A. VTP
- B. RIP
- C. STP
- D. VRRP
Answer: D
NEW QUESTION 69
Fill in the blank to complete the URL for an API call to Cisco SD-WAN to display the history of the Bidirectional Forwarding Detection sessions that run on a vEdge router.
Answer:
Explanation:
bfdsyncedsessions
Explanation:
https://vmanage-ip-address/dataservice/device/bfd/synced/sessions?deviceId=deviceId
NEW QUESTION 70
Drag and drop the steps from the left into the order on the right to create an end-to-end flow for Meraki Splash Screen using EXCAP.
Answer:
Explanation:
NEW QUESTION 71
Refer to the exhibit.
A Python script has been created that calls the Cisco SD-WAN vManage Device Inventory API to get the list of vEdges. The JSON data that returns to a Python dictionary has been converted and assigned to a variable named "d". A portion of the JSON is shown in the exhibit. Which code will complete the expression hostname= to access the hostname?
- A. d("data")[0]("host-name")
- B. d[data][0][host-name]
- C. d["host-name"]["data"]{"0"}
- D. d["data"][0]["host-name"]
Answer: D
Explanation:
The double-quotations are a necessary syntax of Python. And for the json portion doesnt use parentheses. It always uses brackets. d["data"][0]["host-name"] is the only logical answer.
NEW QUESTION 72
Refer to the exhibit.
A RESTCONF GET request is sent to a Cisco IOS XE device. The base URL of the request and the response in XML format are shown in the exhibit. What is the YANG data node that is referenced in the response?
- A. static-routes is a container
- B. route is a leaf list
- C. routing-instance is a container
- D. static-routes is a list
Answer: A
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/iosxml/ios/prog/configuration/166/b_166_programmability_cg/restconf_prog_int.pdf
NEW QUESTION 73
Refer to the exhibit.
How many YANG models does the NETCONF <get> operation interact with?
- A. three
- B. one
- C. four
- D. two
Answer: D
Explanation:
The get operation tag is at the beginning of the document. It interacted only with NTP and its related services. There get operation interacted only with one model.
NEW QUESTION 74
A configuration has been made to add to every switch port a new port description. The script worked initially, but after a few seconds, an HTTP 429 status code was received. What causes this error message from the Meraki cloud?
- A. The API key has expired.
- B. The wrong API key is used to query the data.
- C. The device goes offline while you poll the API dashboard.
- D. The rate limit of the Cisco Meraki API is exceeded.
Answer: D
Explanation:
Section: Cisco Meraki
Explanation/Reference: https://community.meraki.com/t5/Developers-APIs/my-API-Limit-exceed-and-key-is-not-working/td- p/64034
NEW QUESTION 75
Which two features are foundations of a software-defined network instead of a traditional network? (Choose two.)
- A. requires significant physical hardware resources
- B. requires device by device-level configurations
- C. control plane and data plane are tightly coupled
- D. build upon a robust software stack
- E. automated through expressed intent to a software controller
Answer: D,E
Explanation:
In traditional networks, control plane and data plane are coupled tightly. It also requires device by device configurations and of course, it uses physical hardware resources to function. Whereas, SDN is based on a software stack. In Cisco SDNs are automated through expressed intent to a software controller.
NEW QUESTION 76
Information about a rebooted device needs to be displayed with an ID of 260faff9-2d31-4312-cf96- 143b46db0211 using the Cisco SD-WAN vManage Administration APIs. The API documentation states that deviceId is a required request parameter. Fill in the blank to create the REST call.
Answer:
Explanation:
deviceId
https://sdwandocs.cisco.com/Product_Documentation/Command_Reference/Command_Reference/vManage_REST_APIs/Software_Maintenance_APIs/Reboot_Device
NEW QUESTION 77
Drag and drop the characteristic from the left onto the monitoring type described on the right
Answer:
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/iosxr/ncs5500/telemetry/70x/b-telemetry-cg-ncs5500-70x/b-telemetry-cg-ncs5500-70x_chapter_010.html
NEW QUESTION 78
Which two Netmiko methods are used to configure a device? (Choose two.)
- A. send_config_set()
- B. send_config()
- C. send_command()
- D. send_control_from_file()
- E. send_config_from_file()
Answer: A,E
NEW QUESTION 79
Refer to the exhibit.
An engineer creates an Ansible playbook to configure VRF information using a local_vrfs variable. The code must be completed so that it can be tested. Which string completes the code?
- A. up
- B. active
- C. present
- D. on
Answer: C
NEW QUESTION 80
Refer to the exhibit.
Which NETCONF protocol operation is used to interact with the YANG model?
- A. <get-config>
- B. <edit-config>
- C. <copy-config>
- D. <get>
Answer: B
NEW QUESTION 81
A Cisco DNA Center script must be written to retrieve a list of interfaces on a switch. Drag and drop the API calls that are needed to return the list of interfaces using the Command Running APIs from the left into the correct sequence on the right.
Answer:
Explanation:
NEW QUESTION 82 
Refer to the exhibit. A Python script must be created to deactivate vSmart Policy Cisco SD-WAN vManage Configuration APIs. The documentation states the URL is as shown in the exhibit for this REST call using POST, and that "policyId" is a required request parameter. Which line of Python code makes this call, assuming the variable "s" is a valid Requests session object and the variable "policy-id" is the policyId?
- A. s.port('https://vmanage:8443/dataservice/template/policy/vsmart/activate/', data = {'policyId':
policy_id}) - B. s.port('https://vmanage:8443/dataservice/template/policy/vsmart/activate?policyId=%s' % policy_id)
- C. s.port('https://vmanage:8443/dataservice/template/policy/vsmart/activate/%s' % policy_id)
- D. s.port('https://vmanage:8443/dataservice/template/policy/vsmart/activate&policyId=%s' % policy_id)
Answer: B
Explanation:
Section: Cisco SD-WAN
Explanation/Reference:
NEW QUESTION 83
......
2021 Valid 300-435 test answers & Cisco Exam PDF: https://dumpsstar.vce4plus.com/Cisco/300-435-valid-vce-dumps.html